Question

Hello,

Looking for an industrial Ethernet router to terminate VPN connection at remote site, with at least 50Mbps throughput.
I can't find data about Mbit/s / packets/s  performance of RUTX08/X10 Cortex CPU when doing AES-256 over VPN tunnel.

Has anybody tried to measure IPerf throughput over an VPN connection over Ethernet (i.e.when speed is not limited by LTE or any other slow operator network) ?
Does Teltonika provide the benchmark data, at least, with "openssl speed", to enable customers to select correct platform according to network performance?

all the best,
Andrew

Comments

Tested ipsec on Fortigate 60E with AES256 from an RUTX11 to speedtest.net (2ms 41.5/40.11 Mbps)
And with AES128 (2ms 47/45Mbps)

And the RUT240 with AES128 to Fortigate 60E (3ms 16.6/16.2 Mbps)

Answer 1

Hi,

please check:

[ ID] Interval Transfer Bandwidth
[ 5] 0.00-60.35 sec 367 MBytes 51.0 Mbits/sec receiver

[ ID] Interval Transfer Bandwidth Retr
[ 5] 0.00-60.00 sec 360 MBytes 50.4 Mbits/sec 12 sender
AES256