FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
774 views 0 comments
by anonymous

Hi,

I want to setup an IPSEC VPN using 4G on my RUT955 running FW RUT9XX_R_00.06.05.1. The VPN seems to be established (see output below), but it's not possible to reach the remote end. The remote end sees traffic leaving towards the Teltonika, but nothing coming back, so I guess it's not being routed on the Teltonika.

root@Teltonika-RUT955:~# ipsec status

Shunted Connections:

passthrough0:  172.22.221.64/29 === 172.22.221.64/29 PASS

Security Associations (1 up, 0 connecting):

     CAM9_4G[1]: ESTABLISHED 4 seconds ago, 192.168.27.42[mobile09pol]...192.168.249.254[192.168.249.254]

     CAM9_4G{1}:  INSTALLED, TUNNEL, reqid 1, ESP SPIs: c28f2636_i 4e8e8151_o

     CAM9_4G{1}:   172.22.221.64/29 === 172.22.0.0/16

The configuration of the IPSEC VPN is as follows;

Anyone have any ideas or suggestions? A lot of the questions have information missing, as most seem to be continued by PM..

Kind regards

Tom

2 Answers

0 votes
by anonymous
Hello,

I think the problem is that your local subnet is included into remote.
0 votes
by anonymous
It was a configuration issue. It worked fine using other credentials.