FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

12077 questions

14373 answers

22645 comments

36197 members

0 votes
697 views 0 comments
by

Hi,

I want to setup an IPSEC VPN using 4G on my RUT955 running FW RUT9XX_R_00.06.05.1. The VPN seems to be established (see output below), but it's not possible to reach the remote end. The remote end sees traffic leaving towards the Teltonika, but nothing coming back, so I guess it's not being routed on the Teltonika.

root@Teltonika-RUT955:~# ipsec status

Shunted Connections:

passthrough0:  172.22.221.64/29 === 172.22.221.64/29 PASS

Security Associations (1 up, 0 connecting):

     CAM9_4G[1]: ESTABLISHED 4 seconds ago, 192.168.27.42[mobile09pol]...192.168.249.254[192.168.249.254]

     CAM9_4G{1}:  INSTALLED, TUNNEL, reqid 1, ESP SPIs: c28f2636_i 4e8e8151_o

     CAM9_4G{1}:   172.22.221.64/29 === 172.22.0.0/16

The configuration of the IPSEC VPN is as follows;

Anyone have any ideas or suggestions? A lot of the questions have information missing, as most seem to be continued by PM..

Kind regards

Tom

2 Answers

0 votes
by
Hello,

I think the problem is that your local subnet is included into remote.
0 votes
by
It was a configuration issue. It worked fine using other credentials.