FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
727 views 2 comments
by anonymous

I want to connect RUTX11 with AVM Fritz!Box 6840 via IPSEC VPN

I've seen some howtos. In theese howtos I've to set Local identifier and Remote identifier.

In Firmware RUTX_R_00.02.00.2  the config is other than the wiki https://wiki.teltonika.lt/view/RUTX11_VPN

My looks like this

When i read the log with command  logread -f I see

no IKE config found for XX.XX.XX.XX...XX.XX.XXX.XX, sending NO_PROPOSAL_CHOSEN

 

1 Answer

0 votes
by anonymous
Hello,

your local and remote identifiers are missing, enter them in corresponding fields.
by anonymous
I entered the fqdn in theese fields. On Old Firmware I have to select the Type IP or FQDN and the Value like "sub.domain.org" or "22.21.23.55".

Now I can only input one field for local and remote.

what is the input for this?

fqdn

"fqdn:sub.domain.org"

ip

"ip:22.21.23.55"

or something like this?

Or Only the Values?

fqdn

"sub.domain.org"

ip

"22.21.23.55"

I tested only the values, but with the Error in the first post.
by anonymous
You need to enter just values.

System parse them automatically.

can you check /tmp/ipsec/ipsec.conf and /tmp/ipsec/ipsec.secrets?