Hi
I have successfully connected my rut950 to our mikrotik router os pptp server.
I am now struggled with routing metric weight with existing routes .
I would like that all the traffic is going over this pptp link
Successive traceroute commands are showing different network paths according this
root@TELTO2:~# traceroute 192.168.24.110
traceroute to 192.168.24.110 (192.168.24.110), 30 hops max, 38 byte packets
1 192.168.250.247 (192.168.250.247) 0.236 ms 192.168.107.252 (192.168.107.252) 0.039 ms 192.168.250.247 (192.168.250.247) 0.201 ms
2 192.168.111.247 (192.168.111.247) 0.580 ms 192.168.24.110 (192.168.24.110) 0.612 ms 192.168.111.247 (192.168.111.247) 0.033 ms
root@TELTO2:~# traceroute 192.168.24.110
traceroute to 192.168.24.110 (192.168.24.110), 30 hops max, 38 byte packets
1 192.168.107.252 (192.168.107.252) 0.487 ms 192.168.250.247 (192.168.250.247) 0.283 ms 192.168.107.252 (192.168.107.252) 0.438 ms
2 192.168.24.110 (192.168.24.110) 0.801 ms 192.168.111.247 (192.168.111.247) 1.034 ms 192.168.24.110 (192.168.24.110) 0.860 ms
routing table according
root@TELTO2:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 192.168.107.252 255.255.255.255 UGH 0 0 0 pptp-mqtt
default 192.168.250.247 0.0.0.0 UG 0 0 0 eth1
default 192.168.107.252 0.0.0.0 UG 0 0 0 pptp-mqtt
default 192.168.5.247 0.0.0.0 UG 10 0 0 wlan0
10.32.11.0 * 255.255.255.0 U 0 0 0 br-lan
192.168.5.0 192.168.5.247 255.255.255.0 UG 100 0 0 wlan0
192.168.107.252 * 255.255.255.255 UH 0 0 0 pptp-mqtt
192.168.250.0 * 255.255.255.0 U 0 0 0 eth1
192.168.250.247 * 255.255.255.255 UH 0 0 0 eth1
xxx.xxx.xxx.xxx 192.168.250.247 255.255.255.255 UGH 0 0 0 eth1
What is the best way to achieve pptp link only ?
Thanks in adavance for your support
Stéphane
