Question

Hy.

I try to use the TRB145 I/O pins to read/write states but it seems it is not working like in documentation.

I do something wrong?

Answer 1

Hello,

It seems that the instructions in Wiki aren’t completely correct.

To change input/output type you can use these commands:

http://192.168.2.1/cgi-bin/io_type?username=admin&password=admin&type=in&pin=dio0

http://192.168.2.1/cgi-bin/io_type?username=admin&password=admin&type=out&pin=dio1

and to change output state you can use:

http://192.168.2.1/cgi-bin/io_state?username=admin&password=admin&state=on&pin=dio0

http://192.168.2.1/cgi-bin/io_state?username=admin&password=admin&state=off&pin=dio1