Question

Hello I have a problem with RUT240 local network I have 2 systems in local. On laptop an one machine. With other routers i have. I take the control locally of this machine without problems But with RUT240 nothing. The machine looks to see it is in the same network. But the laptop don't manage to communicate.

I tested to connect both in ethernet (wan is changed for lan) so i was using both ethernet ports. I tested with laptop in ethernet and the machine in wifi. The reverse. Nothing work.

The machine work on 9000 and 9050 ports. I tried to open those ports in lan source and destination. I tried to open every ports 1-10000 I don't know if i did correctly and don't know if it is the appropriate solution.

Can you help me please to solve this and stop the firewall blocking me Thanks

Answer 1

Hello.

Could you describe the connection topology?

Best regards.

Comments

Hello, What do you need about typology ? I put a picture in next answer. I don't know what to describe more with my actual competences.
Best

Answer 2

Actual first step is this one. Ethernet cable between everything.
Second step will be to change ethernet connection to the machine for a wifi connection to the RUT240

I can ping the ip adress of the machine but the software don't recognize the machine into the local network. So i imagine there is something with firewall. A basic home router work without any problem with the software with same setup