FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
889 views 8 comments
by

Hello

I want router to send SMS when a value is detected on Modbus TCP.

I have it working, but the router sends too many SMS, it repeats sending SMS until the value is back to normal value.

I only want one SMS when the alarm condition is met. Not hundreds SMS if the alarm condition is contiously...

I found the same question and a fix for RUT955. https://community.teltonika-networks.com/10054/rut955-control-modbus-alarm-after-register-trigger-detected?show=10054#q10054

But I have RUTX09 (FW VER: RUTX_R_00.02.01.1)

I also have one RUTX11 that I will use in another project, where I need the same thing.

by
Hi All,

I have the same issue with sending lots of sms but on RUT240. I don't have option showed on manual "Action frequency" on my webui ( I am using RUT2XX_R_00.01.13.1 firmware). I've tried to put this option in to config file - doesn't work.
Anyone can help?

1 Answer

0 votes
by anonymous
Hello,

Redundancy protection feature for RUTX09 modbus alarms is expected in the next firmware release.
by
When is next release to be expected?
by anonymous
At the moment there is no exact date, so it is hard to tell, but new version can be expected at the end of April.
by anonymous
Has this firmware been released so far?
Is firmware available for RUT240 to prevent the same?
by anonymous

Hello,

Yes, this firmware was released 2020.05.15. For more information and FW changelogs, check RUTX09 Teltonika Networks wiki: https://wiki.teltonika-networks.com/view/RUTX09_Firmware_Downloads

No, RUT240 does not have firmware with this feature.

by anonymous
Hello,

thank you for the fast reply.

Is this feature for RUT240 not available in general or is it just not available in present?
by anonymous

Hello,

I have for tests RUTX11 where "Action frequency" is available. 

I get RUT240 for customer project because on https://wiki.teltonika-networks.com/view/RUT240_Modbus is picture where "Action frequency" is available. There is no Action frequency in field descption on same site and even in the latest firmware. I should prepare workaround in PLC. Alarms variables to be equal to Alarm expresion same time only as period of Modbus pulls.

If there is no plan to add this feature to RUT240, could you change the wiki picture to real one, please !

If new product RUT360 should be follower of succesful RUT240. Is this feature available in it?

By wiki site it should be there: https://wiki.teltonika-networks.com/view/RUT360_Modbus#Alarms_Configuration 

by anonymous
Hello,

Currently there is no plans for "Action frequency" feature implementation.

Thank you for information about this mistake, well will update this.

As for RUT360, currently Modbus functionality is in development, but it will has same features as RUTX09.