Question

Hello

I recently purchased a RUT950. I'm using a 4G SIM from a national mobile operator (bouygues) in France.

The 4G connection breaks down really often, the only thing I could get in RUT950 troubleshooting > system logs is :

Tue Dec  4 12:57:08 2018 local1.crit luci-reload[22856]: START==1

Tue Dec  4 12:57:26 2018 local1.crit luci-reload[22931]: START==1

Tue Dec  4 13:01:52 2018 kern.info kernel: [89854.250000] Ports leds ON

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd send: 'AT+QCSQ' (8)

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd get: '+QCSQ: "LTE",74,-100,156,-7' (27)

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd send: 'AT+QCSQ' (8)

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd get: '+QCSQ: "LTE",74,-100,156,-7' (27)

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd send: 'AT+CPIN?' (9)

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd get: '+CPIN: READY' (12)

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd send: 'AT+CREG?' (9)

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd get: '+CREG: 2,1,"77B0","84A1C00",7' (29)

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd send: 'AT+CSQ' (7)

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd get: '+CSQ: 20,99' (11)

Tue Dec  4 13:01:52 2018 local1.info gsmd[1885]: gsmd send: 'AT+QCSQ' (8)

Tue Dec  4 13:01:53 2018 local1.info gsmd[1885]: gsmd get: '+QCSQ: "LTE",74,-100,158,-7' (27)

Tue Dec  4 13:01:53 2018 local1.info gsmd[1885]: gsmd send: 'AT+QCSQ' (8)

Tue Dec  4 13:01:53 2018 local1.info gsmd[1885]: gsmd get: '+QCSQ: "LTE",74,-100,158,-7' (27)

Tue Dec  4 13:01:56 2018 local1.crit luci-reload[23897]: START==1

Tue Dec  4 13:02:00 2018 local1.crit luci-reload[23930]: START==1

Any idea if there is something wrong ? I'm using RUT950 in bridge mode.

Regards,

Cédric

Comments

I'm using     FW ver.: RUT9XX_R_00.05.02.7

---

comment deleted

Answer 1

Hello,

We are currently looking into bridge mode issue. Could you let me know if you have the same issue with this FW version ?

https://wiki.teltonika.lt/wiki/images/a/ae/RUT9XX_T_R53_00.05.02.174_WEBUI.bin

Comments

There are some related fixes in the latest FW version. Perhaps it could help you out. You can download it from here.

---

I think your link is incorrect. Which version should I try ?

---

Sorry, here it is: https://wiki.teltonika.lt/view/File:RUT9XX_R_00.05.03.2_WEBUI.bin

---

Seems better with this firmware. I'll keep you in touch tomorrow.

Regards

---

Hello,

Same problem with this firmware, after factory reset.

Switching back to NAT mode