Question

I have two Teltonika RUT950 Router. RUT1 (Lan IP: 192.168.18.0/24) while RUT2 (Lan IP 192.168.98.0/24). The Lan Interface of RUT is given an IP address 192.168.18.2 while the RUT2 is given 192.168.98.240. I have successfully established an IPsec VPN between the two routers (RUT1 is a dynamic public IP while RUT2 is connected to a static public IP). I can ping all ends from the RUT1 to the RUT2 LAN's. I want to route traffic to another router (cisco router) at the RUT2 end (192.168.98.20) so that any request for 172.21.22.12 (webserver) should be forwarded to 192.168.98.20 router at the RUT2 end. Please, how can I direct traffic/route this request to the VPN end of the tunnel subnet (RUT2 LAN SUBNET where the 192.168.98.20 cisco router resides)

Answer 1

Hello,

You will need to add static routes so that the (192.168.18.2) router would forward the traffic to another (192.168.98.240) router.

If you will have any more questions, contact me via private message.