Question

Good day,

We planned to buy a RUTX11 (with Quspot) to place on a sailing ship.
the idea is.

1. When in its default location. connect to the marina wifi
2. When sailing connect to a 4G location
3. When in a new marina. the owner needs to login and add the wifi to the device.
4. When reteurning to a already visited (of default) marina it connect to the known wifi.

For point 4 the question is. does it remember the old networks or is this always a manual action?

Comments

Hi,

did dyou find something that works for you - I want to create the same solution. The boat shall automatically send data to IOT-Servers and I want to access via VPN checking cameras and settings on board.

Primary connection is marina hotspot, second and third SIM-Cards.

Unfortunately, I bought the RUTX11 already - but it doesnt seem to work as the WAN-connection can only use mobile or wired interface (with the newest Firmware!?). Before one could define it??

Thanks a lot 

Frank

---

Hi Frank,

I am trying to use an RUTX11 in a similar manner.

It looks like the latest firmware RUTX_R_00.02.06.1 should do what we require: https://wiki.teltonika-networks.com/view/RUTX11_Failover

Although I am still struggling to configure more than one wifi network such that it will select one of those ahead of the mobile networks when in range.

Please report back here if you have had any success?

Answer 1

Hello,

A feature like that is not available on RUTX devices. Although our RND team could create it for you. If you want to do that, contact Teltonika's sales manager.