WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14163 questions

16817 answers

27651 comments

54086 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to wifi openvpn not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus

SMS Post/Get cannot view sent text

0 votes
382 views 2 comments
by

HI There,

Im using a RUT950 to send text messages via  SMS Post/Get which works fine but none of the messages are held or can be veiw when you run the below command.

http://IPADDRESS/cgi-bin/sms_list?username=admin&password=password

 The below text was sent directly via the browser not via the above command.

Index: 1

Date: 2020-04-24 18:20:16

Sender: +44

Text: monitoring_status

Status: read

------------------------------

Index: 2

Date: 2020-04-24 18:14:31

Sender: +44

Text: switch_sim

Status: read

------------------------------

1 Answer

0 votes
by

Hi,

When POST/GET function is enabled (Services -> SMS Gateway -> Post/Get menu), it provides you with the possibility to perform SMS related action requests by writing them in the URL field of your web browser.

If you write URL: http://IPaddress/cgi-bin/sms_list?username=user1&password=user_pass

Note: <user1> - SMS post/get configuration user name; <user_pass> - SMS post/get configuration password

  • Do you see message list output on your browser?
  • Please, explain in more details, in what software do you use this command?
  • Is this software compatible to send HTTP post/get strings to router?
  • What output or error do you get then?

It is always recommended to check is your device is running latest firmware. You can download it here.

I look forward to clarifications from you.

Regards.

by

<!--[if !supportLists]-->·       <!--[endif]-->Do you see message list output on your browser?

<!--[if !supportLists]-->·       <!--[endif]-->Please, explain in more details, in what software do you use this command?

http://x.x.x.x/cgi-bin/sms_list?username=admin&password=xxxxxx

<!--[if !supportLists]-->·       <!--[endif]-->Is this software compatible to send HTTP post/get strings to router?

yes

<!--[if !supportLists]-->·       <!--[endif]-->What output or error do you get then?

None the router displays the above two messages only., see below as it has sent 78!.

It is always recommended to check is your device is running latest firmware. You can download it here.

  • FW ver.: RUT9XX_R_00.06.05.3

by

String http://IPaddress/cgi-bin/sms_list?username=user1&password=user_pass provides all SMS messages in storage, this means only received SMS.

It is not possible to get output of send SMS messages.