The device came from the factory with RUTX_R_00.02.00.1, then I upgraded to the latest trying to see if that would make a difference (RUTX_R_00.02.01.1)
I also just now downgraded to RUTX_R_00.02.00.2
None of those firmware seem to be able to flash the SDK's openwrt-ipq40xx-qcom-ipq4018-rutx-squashfs-nand-sysupgrade.bin onto the device.
Is that the correct file I should use to flash onto the device?
These were in under the /bin/targets/ipq40xx/generic after make
openwrt-ipq40xx-qcom-ipq4018-rutx-fit-uImage.itb
openwrt-ipq40xx-qcom-ipq4018-rutx-initramfs-fit-uImage.itb
openwrt-ipq40xx-qcom-ipq4018-rutx-squashfs-apps.bin
openwrt-ipq40xx-qcom-ipq4018-rutx-squashfs-nand-factory.ubi
openwrt-ipq40xx-qcom-ipq4018-rutx-squashfs-nand-sysupgrade.bin
The sysupgrade file looked like the one I should use