Question

blesemd -D is running, it doesn't see any incoming message when I do a scan from a phone.

A scan from the interface doesn't give any result either.

No process has /dev/ttyUSB3 open, is something missing in /etc/board.json ?

Regards.

Answer 1

Hello,

Please upgrade RUTX to latest firmware. You can download it from Teltonika wiki page:

https://wiki.teltonika-networks.com/view/RUTX11_Firmware_Downloads

Additionally, check this wiki article for UBUS commands for Bluetooth:

https://wiki.teltonika-networks.com/view/How_to_use_UBUS_commands_for_Bluetooth_device_scanning_/_pairing

If issue persists, download “Troubleshoot file” from RUT device (menu System -> Administration -> Troubleshoot) and send it to me via private message.

Regards

Comments

Thank you for your answer. Discovery/pairing doesn't work after the upgrade of both the firmware and the modem.

I have checked with ubus call blesem scan.start / .result.

Nothing happens, the result is "scanning": 1 during about 30s then it goes back to "scanning": 0 and the "devices" array stays empty.

I'll send you the troubleshhot file via private message.

Regards,

---

I got your TS file. I will examine it. In addition, could you provide me output information for commands:

blesemd -D

ubus list

Thank you in advance

---

Hello,

For blesemd:

root@lgrrutx:/etc/config# blesemd -D

Initializing blesemd...

Warning: debug messages will be shown!

Preparing bluetooth interface...

Reading config...

Devices loaded: 0

Creating database...

modbus_data table already exists

SENT_ID_TABLE already exists

Create DB done

Initializing uloop...

Connecting to ubus...

Initializing BLE device...

Initializing BLE ubus interface...

Adding ubus object...

Running...

and nothing more happens.

For ubus list:

root@lgrrutx:~# ubus list

blesem

dhcp

dnsmasq

file

gpsd

gsmd

hostapd.wlan0

hostapd.wlan1

ioman.gpio.din1

ioman.gpio.dout1

ip_block

iwinfo

log

mdcollect

mnfinfo

mwan3

network

network.device

network.interface

network.interface.hwf0

network.interface.lan

network.interface.loopback

network.interface.mob1s1a1

network.interface.mob1s2a1

network.interface.mob1s2a1_4

network.interface.wan

network.rrdns

network.wireless

port_events

quota_limit

service

session

sim

sms_limit

system

uci

root@lgrrutx:~# 

Hope this helps.

Regards,

Francis Le Bourse