4504 questions

5529 answers

8723 comments

5420 members

0 votes
478 views 8 comments
by
Hi,

I wanted to send my Modbus TCP Third party device data to Azure IOT HUB.How I can configure RUT950??

Kindly let me know I built the connection with Azure IOT Hub & RUT950. Now I wanted to send my Third party device data to Azure IOT HUB.

Thanks

1 Answer

0 votes
by
Hello,

Regarding your query you can do it via Modbus Data to Server.

For more information i would like you to refer to this manual: https://we.tl/t-0AUFhDEuK1.

Hope it helps

Stay Safe.

Regards,
Jerome
by
Hi Jerome,

I just made this connection & Its not working.

I have connected 3Device with Modbuss TCP Data transfer to LAN 1 port of Teltonika Router.

Now I am unable to send the data of Modbus device data to Azure,I made the succesful connection with the Azure IOT Hub & Teltonika device.

data transmission not able success.

Thanks
by
Hello,

Could we do a short remote session with your issue? Kindly communicate with me via pm.

Thank you and have a nice day!
Stay Safe

Kind Regards,
Jerome
by
Hi Jerome,

Thanks for the details & configuration.

I am getting segmentation error in CLI. Can you please check.

Thanks

Gagan
by
Hello,

Kindly provide me the troubleshoot file here.

Thank you and have a nice day!
Stay Safe

Kind Regards,
Jerome
by

Hi ,

please find the troubleshoot file.

Troubleshoot file

Thanks

by

Hello, 

Regarding your problem i would recommend you to do some reconfiguration with your RUT950 device. 
I recommend re-flashing the firmware without keeping the settings. The latest firmware can be found on
this link: https://wiki.teltonika-networks.com/view/RUT950_Firmware_Downloads 

Then in configuring Modbus Data to Server kindly follow this steps:

1. Download the package of Azure IoT Hub
2. Then configure the Modbus TCP Master 
3. Once done configuring Modbus TCP master configure modbus data to server via Azure MQTT.

I have already shared you the document file in configuring azure iot hub with Modbus Data to server.

Hope it helps


Thank you and have a nice day!
Stay Safe

Kind Regards,
Jerome

by
Hi Jerome,

I configured same as per your comment, Connection has been established its working fine.

thing that I configured Modbus Master TCP slave device Values I am not receiving.

It will be great if you can see it.

Thanks

Gagan
by
Hello,

Regarding the issue you are having kindly make sure you have set a different Slave ID. Also try making a Modbus TCP Master config for the slave ID you set.

Hope it helps

Regards,
Jerome