Question

From the RUTX11 website, it seems that the Compact DIN rail kit https://teltonika-networks.com/product/compact-din-rail-kit/

(code: 088-00270) can be used for the RUTX11. I have bought the router and the kit, but the router has no holes to fix the two screws in.

What is the magic? I need to fix the RUTX11 on a wall and was thinking to use the a DIN rail bar.

Thanks.

Answer 1

Hello, 

You can screw it on the side of RUTX11 and at the bottom of RUTX11. 

Kindly refer to the picture below for the side installation of the Compact DIN rail. 


You can also screw the Compact DIN Rail at the bottom side of RUTX11. 

Hope it helps

Regards,

Jerome

Comments

Thanks for your answer, and there is another groove of that kind on the back face, but it is not properly designed for screws as there are no holes. The screws are very loose.

---

Hello, 

Thank you for the feedback. But it is supposed to fit on the gap provided on the back side of the RUTX11. 

Like this image shown below: 



Hope it helps 

Regards,
Jerome

---

I'm also trying to figure this out.  Do the screws tap/drill their own holes into the gap?

---

Hello, 

This images could help you understand using compact din rail.

Compact DIN Rail Samples

Hope it helps

Regards,
Jerome