Hello,
it seems that i have bricked the RUT955. I have developed a script that updates a official RUT955 Firmware over sysupgrade. To check if the firmware flash is complete, i poll the SSH port and try to reconnect and check if it is back again. Then in the middle of the firmware flash the ssh login poll responded but with an error and it seems that the firmware flash procedure also stopped and ssh died again. The device would do nothing for almost 30 minutes, so i turned it off and on. After this it was totally dead. I can boot into the bootloader recovery mode, but it was totally broken. The html layout is destroyed, and the update button simply dosent work anymore. I tried the script again with a second device to verify if it was some kind of hardware issue, and the same brick happend again.
Is there a other way to resurrect the RUT955? (TFTP?)
Cheers