Hello , i have set up an IPSEC tunnel from a RUT950 firmware 6.0.6 to a Fortigate firewall.
I found a configuration that works following this tutorial :
The only difference was that i had to flag the tab force encapsulation, not sure why that was necessary but it is not the main issue.
Originally i set up the VPN as the example , with local network 192.168.3.0/24 and remote network 192.168.2.0/24 and was working just fine.
Then i wanted to route all the traffic trough the VPN , so i changed the remote network with 0.0.0.0/0 ( i did the same with local network on the Fortigate)
The result is that the tunnel is up and running , from Teltonika gui and cli i can ping just about everything trought the tunnel.The problem is that from the client on the 192.168.3.0/24 segment i cannot reach anything , not even the teltonika gui at 192.168.3.1.
Is there a different approach when configuring a tunnel VPN in which i want to route all the traffic ? i couldn't find an example for this kind of configuration , any help would be appreciate