WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

RUTX09 Modem issue

0 votes
354 views 5 comments
by
Hmmm....disappointing. I've had a RUT950 for a few years and kept getting frustrated with the modem sitting at "Disconnected" and not connecting. So this week I have purchased a new RUTx09.

Today I lost all internet access, but the router status page showed connected! Clearly it was not. So I chose to restart the modem (not router) and got connectivity again.

I thought this kit was supposed to be rock-solid robust???
by anonymous

I am also facing same issue, If you found any helpful guide, Please let me know. Thanks

by anonymous

hey i m Anupama from India , i need some help , im facing some critcle issue, if you found any helpfull guide please let me know about it..I will be thank full to you.

2 Answers

0 votes
by anonymous
Hello,

Could you tell us what firmware version you are using? Also, please describe your mobile configuration (APN, bands, add screenshots).

Regards.
by

Firmware: RUTX_R_00.02.04.3

Modem: EG06ELAR04A03M4G

Mobile configuration is default values. Single SIM card in SIM1

Service mode Auto

Band selection Auto

Connection mode Auto

Many thanks

Jim

by anonymous
I highly recommend using custom APN configuration (you can find your service provider APN on the internet or contact them directly to provide you with one). Also, you could set manual band selection to improve your connection. Refer to this site: https://www.frequencycheck.com/ to check your operator supported bands and select them in router settings.

Another suggestion to prevent you from losing connection for longer periods of time is to configure auto-reboot settings. Once you lose connection, the router could automatically reboot your modem after a set time interval. https://wiki.teltonika-networks.com/view/RUTX09_Auto_Reboot
0 votes
by
Thanks VykintasKuzma. I am in the UK on EE and will try using "everywhere" with the APN.

That doesn't answer the question of why the GUI showed "connected" though.

Thanks for the tip on the auto-reboot, I will do that.
by anonymous
It is hard to answer that question right now. If the issue repeats itself, please send me your router troubleshoot file via private message. I will investigate router logs.