FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
497 views 15 comments
by
In case of simultan wireless-station and wireless-access-point mode, the autoconnect (after reboot the Router) of the wireless-station is not working. I get the following kernel log messages:

[ 5753.860000] wlan0: authenticate with 7c:5a:1c:45:xx:xx
[ 5753.880000] wlan0: send auth to 7c:5a:1c:45:xx:xx (try 1/3)
[ 5753.980000] wlan0: send auth to 7c:5a:1c:45:xx:xx (try 2/3)
[ 5754.030000] wlan0: send auth to 7c:5a:1c:45:xx:xx (try 3/3)
[ 5754.080000] wlan0: authenticated
[ 5754.090000] wlan0: associate with 7c:5a:1c:45:xx:xx (try 1/3)
[ 5754.130000] device wlan0-1 entered promiscuous mode
[ 5755.780000] wlan0: associate with 7c:5a:1c:45:xx:xx (try 2/3)
[ 5759.060000] wlan0: associate with 7c:5a:1c:45:xx:xx (try 3/3)
[ 5759.130000] wlan0: aborting association with 7c:5a:1c:45:xx:xx by local choice (Reason: 3=DEAUTH_LEAVING)

The autoconnect with disabled acces point is working as expected:

[  294.150000] wlan0: authenticate with  7c:5a:1c:45:xx:xx
[  294.170000] wlan0: send auth to  7c:5a:1c:45:xx:xx (try 1/3)
[  294.180000] wlan0: authenticated
[  294.220000] wlan0: associate with  7c:5a:1c:45:xx:xx (try 1/3)
[  294.230000] wlan0: RX AssocResp from  7c:5a:1c:45:xx:xx (capab=0x431 status=0 aid=1)
[  294.240000] wlan0: associated

FW ver.: RUT9XX_R_00.06.07

1 Answer

0 votes
by anonymous
Hello,

Could you provide me with information about the device you are using and the firmware version. Before proceeding please check if you are using the latest firmware version, if not please install it and try again.

Regards.
by
Thanks for the explanation. I can try your suggestion on Saturday at the earliest, I will contact you again on Monday.
by
Hello,

I just reinstalled the firmware via bootloader, set up the wifi connection and started the AP. Directly after the first reboot, the router did not connect to my wifi network. The kernel logs are the same as in my first post.

What i noticed is that when the mentioned error occurs and i deactivate the AP, what wireless module restarts (according to the status information in the upper right corner) but this restart does not cause the wifi client of the router to reconnect. Even if I restart the whole router this will not happen. Only when I deactivate and reactivate the wireless station in the WLAN menu, the router connects to the external wifi.
by anonymous
Hello,

I will try to test a few times more, if I will reproduce it successfully, I will forward this to our RnD team. Also, there may be a hardware issue in your router that causes this trouble.

Regards.
by
Hello, is there any news from your side? I have now tested a second router (RUT950), which unfortunately behaves the same.
by
Hello folks

Have any of you had any progress? I am experiencing the same. I am also using WIFI as my main (and only) WAN connection. After a reboot the wifi does not cennect automaticly.

BR, Henrik Nyholt