Question

I did connect a ublox f9 to the rs232 and did use the ntrip client to get rtcm data into the f9.

the ntrip server needs the position feedback from ntrip client. i did examine it and did see that the feedback is only send once.

is it possible to setup maybe send every x seconds?

Answer 1

Hello,

That's not how it's supposed to work. i.e., it should be live communication, not sending data once or every x seconds.

I'm not familiar with u-blox F9, but we have tested this with Trimble CFX-750: https://www.trimble.com/agriculture/cfx-750.aspx?dtID=overview&

So maybe I can spot something wrong in the configuration. Can you share a screenshot of the RS232 configuration page?

Comments

I did try it with use device gps(with antenna at rut) and without...

---

Hi Andreas,

It seems to me like we have a similar challenge with the RUT955. Have you found a resolution yet? Please take a look at my forum thread:

https://community.teltonika-networks.com/5376/ntrip-client-not-working-on-a-moving-platform?show=5390#c5390

Regards, Helge