FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
197 views 2 comments
by anonymous
I have establish a Vpn (ipsec) connection1 with RUT900 (mobile)  and Vigor router with static ip.

I have establish a Vpn (ipsec) connection2 with RUT900 (mobile)  and Vigor router with static ip.

My problem is that I cannot ping RUT1 to RUT2 throw Vigor.

<!--[if gte mso 9]> <![endif]--><!--[if gte mso 9]> Normal 0 false false false EN-US X-NONE X-NONE <![endif]--><!--[if gte mso 9]> <![endif]--><!--[if gte mso 10]>

<![endif]-->

1 Answer

0 votes
by anonymous
Hello Kostas!

Have you tried setting up static routing?

More information on the link below:

https://wiki.teltonika-networks.com/view/RUT900_Routing#Static_Routes

BR

Aliaksandr
by
I have tried but with no lack

what kind of configuration i have do in static routing.

My Vigor router have ip 192.168.10.xx

my Station1 ip 192.168.1.xx

my Station2 ip 192.168.2.xx
by anonymous

Hello.

Select the MAIN Routing Table. The interface corresponding to your tunnel. In the destination address, you specify the address of the device to which you are sending the ping, then specify the netmask. And the gateway through which you want to send traffic, in this case the IP address of Vigor. These settings can be applied to all devices.

Also, as a check, try to ping not by the usual command, but by the following:

ping -I <source IP> <destination IP>

BR

Aliaksandr