WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

RUTX11 QAM check

0 votes
246 views 3 comments
by anonymous
Dear support ,

How I can check the qam mode via cli?

1 Answer

0 votes
by anonymous
Hello,

Do you want to know via CLI if the modem is working in 16QAM, 64QAM or QSPK when working on WCDMA?
by anonymous
YES. That is the question about
by anonymous
Hello,

Sorry for the delay, I'm consulting with colleagues, due I made some tests and I didn't find the way to do it.

As soon as possible I'll return with their feedback.

Regards.
by anonymous
Hello,

Unfortunately, modulation type can't be reached via CLI.

Also, modulation type is static and it depends of the LTE category. The following picture shown which modulation type is used for each one. http://www.techplayon.com/wp-content/uploads/2018/07/UE-2.png

RUTX11 has a LTE CAT 6 module, so according to the table it uses 64QAM for DL and 16QAM for UL.

Any further doubt please let me know.

Regards.