6691 questions

8057 answers

13124 comments

9282 members

0 votes
238 views 4 comments
by
Set up IPSEC between RUT240 and RUT955, IPSec status is up but unable to ping to end device. Configuration same as example configuration with only 1 public IP only. Can anyone tell me what had being missing? or any can guide for this? Thanks in advance

1 Answer

0 votes
by
Hi,

Have you followed this wiki during the configuration of your IPSec? https://wiki.teltonika-networks.com/view/IPsec_configuration_examples

If yes and you still have troubles pinging your end devices - try renewing DHCP leases (you can do that by disconnecting the device from the router by unplugging the cable).

EB.
by

Hi EB, thanks for you kind response. I followed configuration https://wiki.teltonika-networks.com/view/IPsec_configuration_examples. Even renew DHCP leases, it still cannot ping to end device. Do any other setting need to apply? Thanks 

by
Does your end devices have a firewall that could block ICMP? Please try shutting the firewall off on those devices and see if that makes any difference.

EB.
by
Hi All, I found out IPSEC setup only can ping from my local terminal to remote terminal via cmd. However according to menu, I shall able to ping from CLI (RUT) also and it doesn't not. Can anyone fix this? Thanks
by
Hi All, problem solved. The root cause is Firmware version. Thanks for kind support especially EB