Question

Hello,

If you can indicate the commande or the setting to have the voltage in the power input in a RUT240 ?

Thanks for your support

Answer 1

Hello, 

There is no option to see the live voltage on the power input of the RUT240. It's either if you put a volt meter on the power input of RUT240 or use RUT955 and connect the power input to the analog input and GND of the I/O of RUT955 and from the Input/Out  option on web ui you can see the live voltage on the analog input. 

But here is a link about the power consumption: Power Consumption (RUT240)

Hope it helps.

Regards,
Jerome

Comments

I put a 12 volt battery with a RUT240 in a farm. From then on I would have liked to know the tension there was.

Thanks for your help

---

Hello,

If you want to read the output voltage of the said battery you need to connect a sensor itself.  Or use RUT955 where you will get the supply from the battery and at the same time the RUT955 is powered through battery.

https://prnt.sc/vourph

Hope it helps

Regards,
Jerome