FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
176 views 3 comments
by
Hello,
we have a RUT955 and I tried to use the DIN1 as an alarming contact.
On the website of the router I can see that the DIN1 changes between the states.

I configured an event for DIN1 to send a sms to my handy... But it don't work.
I tried different events (switch the relays, reboot the device, turn wifi on/off) but non of the events take effect.
With the isolated input it is the same problem.

Can someone help me? :)

Cheers
Sebastian

Product Code: RUT955H7VXXX
Firmeware: RUT9XX_R_00.06.07.3
by
Hi Sebastian

I have a switch between pin1 and pin 6.

I select Input Type: Digital and

Trigger: Both. It should work.

 Select: Enable.

Trigger the switch...volla !

Rgds

P.S Monitor activity under Status / Event Log.

1 Answer

0 votes
by
Hello anonymous.

I tested your configuration (but I tested the same way many times before)

My switch between pin 1 and pin 6

But the event is still not working...

:(
by
You are welcome to Teamviewer to my site :-) 1 719 309 961

Helmi
by
To tst if you have an active sms service, go to:

Services/SMS Utilities/SMS Management/Send SMS/ Send SMS to yourself (same SMS number)

Have a look at Status / Eventlog...if you have an active sms number you should see result...

Good luck !

Helmi