FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
297 views 2 comments
by anonymous
Hello,

Hardware: RUT955, Firmware RUT9XX_R_00.06.07.3

I want to send SMS with the INPUT-Rules
I see the correct status of the input (Pin1 + 6), bute the SMS will not be sendet.
Additionally there is no entry in the eventlog

The SIM-card is OK, because when sendeing a SMS manually with teh SMS-Management => SEND SMS, I get the SMS

?????

Thanxs

Greets Robert

2 Answers

0 votes
by anonymous

Hello, 

Regarding this issue, you're having could you try re-flashing the firmware without keeping the settings. 

RUT955 Firmware Downloads - Teltonika Networks Wiki (teltonika-networks.com)

And if the issue still persists let me know. 

Regards,

Jerome

0 votes
by anonymous
Hello

I have exactly the same issue with the I/O Status.

I can send an SMS manually, but if i change the I/O no SMS is sent.

I use the Pin 1 and 6 and i can see the changing status. I have also configured an input rule.

I flashed the firmware (RUT9XX_R_00.06.07.4_WEBUI.bin) again without keeping the settings but the issue still persists.

I configured the SMS only at Input/output, i did not configure anything at sms utilities or sms gateway? Maybe is there anything to do?

Thank you and best regards Werner
by
I tried the analog input too, this works very fine, the SMS is sent immediately.

Regards Werner
by anonymous

Hello, 

I have tested it on my side and it's working fine. 



The configuration is like this one: 



Hope it helps. 

Regards,
Jerome