Question

Hello,

Setup:
Brand new TRB145, two wires and HAGER ECR380D power meter
Newest firmware: TRB1_R_00.02.05.2_WEBUI.bin
P.s. Also tried on: TRB1450_R_00.02.03.2_LEGACY.bin (web gui didn't even allow to set multiple device ID's using "1-32" method)

1. Works:

Testing via CLI or SSH:

root@Teltonika-TRB145:~# modbus_tcp_test 192.168.2.1 502 5 1 3 4215 1 16bit_uint_hi_first 0
Output: [2018]

---

2. Doesn't work:

Testing:

root@Teltonika-TRB145:~# modbus_tcp_test 192.168.2.1 502 5 1 3 4215 1 16bit_uint_hi_first 0
connect: Connection refused

Only changes:
Slave ID configuration type = Obtained from TCP
Permitted slave IDs = 1-247 (tried different combinations like 1,2,3 1-2 etc...)

Am I missing something?!

Answer 1

Hello,

Good day .

You are using a correct format and configurations are also fine.

Could you please do a little remote session ? So, that i can check more and can get some information to better understand the issue.

Thank you.

Have a good day.

Regards,

Ahmed

Comments

Hi,

Tnx for reply, Sure we can!

Sent you private msg.

---

Hello,

I have tested it on my side its really not working.

I have received a reply from HQ that it would be resolved in next firmware release. But for now i cannot provide you a time that when will it be released .

Thank you.

Regards,

Ahmed