FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
834 views 2 comments
by
RUT950

I'm trying to use port forwarding via a vlan connection to a networkswitch. I can see all devices in the Network Topology of the router at the other end of the vlan connection and I can see the incoming traffic and port request, but the router is not connecting through.

1 Answer

0 votes
by anonymous

Hello.

Make sure the router has a public address. Then open remote access (HTTP) via the Internet (System-> Administration-> Access Control) . To test, try logging into the WebUI with a public IP address. If everything is ok, your port forwarding rule should work.

Best regards.

by
Thankyou, that's all setup correctly. It usually works fine, the only difference to my other setups is that the lan connection is via vlan.

All devices appear in the network topology of the router, but the router is blocking the forwarding. I even disabled the firewall, still the same.
by anonymous
I have checked the port forward with vlan and it works. In the forwarding rule, you need to select your vlan subnet as the destination zone and also make sure the internal IP address matches.

https://wiki.teltonika-networks.com/view/RUT950_Firewall#Traffic_Rule_Configuration

Best regards.