WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

webGUI block from VPN

0 votes
265 views 1 comments
by
hello guys,

I need to block own IP webGUI from VPN (WAN blok is possible from GUI-System/Administrationn/Access - remote http).

my LAN IP 192.168.100.1, VPN-L2TP 192.168.0.1

If I have connection VPN - L2TP I am able to access to web GUI via VPN IP(192.168.0.1) or LAN IP(192.168.100.1).

blocking of another device on LAN is works.

I have no idea how block It I tryed to  use FW but not succesful

TNX

1 Answer

0 votes
by anonymous
Hello,

In your case, you should configure the Traffic rule which denies all the traffic to 192.168.0.1 using port 80 for all IPs. You have not described which device you are using, but you could use this guide on how to configure traffic rules: https://wiki.teltonika-networks.com/view/RUT955_Firewall#Traffic_Rule_Configuration

Everything is explained in this guide, if you will have additional information, ask there.

Best regards.
by
hello,

I have RUT950 - static WAN IP,

I dropped all from VPN-L2TP to "device" and  to "LAN". It seems OK for 192.168.0.1. But If L2TP tunel is open I can open webGUI via 192.168.100.1 via tunel not from LAN site - all LAN IP are visible via tunel. If I deny local LAN from VPN how to keep webGUI from LAN site.

TNX