Question

GoodDay!

Configurate wireguard as client in RUT955, but unable to configurate access to the LAN device. Can you help me?

Comments

Hello, did you already solve your problem or found a solution? I also have the same problem, and find no solution! The tunnel works between home PC, Cloud server and RUT router. But other LAN devices connected to Rut, no Wireguard connection and access. Which attitudes should one exception in the RUT exactly? How did you make the configurations with static_routes, Traffic_rules and zone_forwarding? Maybe maybe something departed and evetuel with pictures?
Thanks in advance.

Answer 1

Hello,

If your VPN is already configured, you can create the traffic from VPN using these different ways.

Using Static Router --> https://wiki.teltonika-networks.com/view/RUT955_Routing#Static_Routes

Using Traffic Rules --> https://wiki.teltonika-networks.com/view/RUT955_Firewall#Traffic_Rules

Forwarding the interface at all --> https://wiki.teltonika-networks.com/view/RUT955_Firewall#Zone_Forwarding

Please also take a look to this link, it can be useful to you due it has configuration examples from others VPN protocolos.

https://wiki.teltonika-networks.com/view/RUT955_Configuration_Examples#VPN

Any further doubt please let us know.

Regards.

Comments

Hello, I also have the same problem, and find no solution! The tunnel works between home PC, Cloud server and RUT router. But other LAN devices connected to Rut, no Wireguard connection and access. Which attitudes should one exception in the RUT exactly? How did you make the configurations with static_routes, Traffic_rules and zone_forwarding? Maybe maybe something departed and evetuel with pictures?
Best Regards

---

No. I didn't solve the problem. Connect RUT955 to the openvpn server. In this configuration all works fine.