Question

Hi

I want to establish a remote connection with the PLC (LAN port) via the GSM network. I created a connection via a PPTP tunnel, the connection is active (working) and I have remote access to the router. I can not get to the controller (192.168.0.1). I also do not have internet access when connecting to the router via PPTP.

I would add that via WiFi I connect to the PLC without any problems.

Answer 1

Hello,

It isn't clear from the description where the issue may lie. Could you provide with some additional info:

• Private IP addresses for all the devices involved and information on what device does which role (a drawn topology would be best)
• Configuration specifics for the PPTP Tunnel

Comments

The main problem is the lack of connection with the PLC.

"Topology":

PPTP config:

I have a similar configuration on another router (Sapido) and communication works. Unfortunately, I do not know where else the difference in configuration between these two devices. Sorry but I am beginner.

---

Hi Robert,

Have you managed to configure correctly ?