WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

TRB245: Fetching of modbus data via RS232 serial stops if GPS time sync is activated

0 votes
247 views 3 comments
by anonymous

Test setup with RS232 to fetch modbus data via serial. 
Data sent on to server via http with 'Data To Server' setup. 

I noticed at several occations that fetching of data on the serial line stops.
I had to make some adjustments in the 'Modbus Serial Master' conf. to get it working again.

I noticed that when having serial fecthing active, fetching stops after a while if GPS time sync. is activated from NTP.
I saw once that there was a one hour jump in time for a short while and I guess the 'Modbus Serial Master' doesn't like it?

So to recreate:

1) Setup/Start 'Modbus Serial Master'
2) Setup/Start 'Data To Server' -> Data sent ok
3) Activate with GPS time sync from NTP meny with short interval, 30 min -> Fetching serial data stops after a while (I guess at time sync.).

I have latest FW: TRB2_R_00.02.06.1

1 Answer

0 votes
by anonymous
Hello,

Is it happening with one or all your devices have the same behavior?

Did you restore your device to default settings to avoid any other configuration can be affecting this feature?

https://wiki.teltonika-networks.com/view/TRB245_Device_Recovery_Options

If it's happening with more than one device, also you made these tests restoring to default settings and still happening, I'll try to recreate the issue.

Please let me know.

Regards.
by anonymous
I have only one device for test.

No, I did not restore it to default settings, why should I?

It is a fault, I think you should fix it as it is. For now I remove time sync. and use only NTP.
by anonymous
Hi,

If you made some configurations before to use these features, we recommend to restore to default settings and set up again to avoid any configuration from customer side than can be affecting the device behavior.

I'll try to reproduce the same issue with my own device and will send my feedback.

Regards.
by anonymous
Hi,

I did test with RUTX11, using a modbus TCP slave and I didn't get the same issue. (FW should be similar)

In my case the device is working as expected. I also reported your case, as soon as I get a feedback I'll let you know.

Please let us know if after a factory restore, the device maintains the same issue.

Regards.