FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
211 views 0 comments
by anonymous
Dear.

I need help with the configuration of the RUT955 devices to connect two devices between them, I have created the VPN zero tier network, on RUT955-A I have the device with the IP 192.168.0.15 and on RUT955-B the device has the IP address 192.168 .0.16, I need communication between them, the equipment is connected to the LAN port of the RUT955, I need help with the configuration of the RUT955 for communications. Both RUT955 have a cell phone chip.

Thanks

2 Answers

0 votes
by anonymous
Hi,

I gave example on site to site communication routes with ZeroTier to another user in this post:

https://community.teltonika-networks.com/27018/struggling-with-zerotier-routing-on-trb140?show=27018#q27018

Information on how to configure other sections of the ZeroTier could be found here:

https://wiki.teltonika-networks.com/view/ZeroTier_Configuration

EB.
0 votes
by anonymous

The drawing shows the network that I need to make, the zero tier network works, but the PLCs must be in different networks for communication to exist, the two PLCs must be on the same ethernet network.