FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
584 views 2 comments
by anonymous
Which device i should choose to establish a secure connection with TIA portal and also IOT2000 with SSC (PuTTY for example) ? I also need to be connected to web interface of PLC (s7-1200).

TIA v16
EU - 4G

1 Answer

0 votes
by anonymous
Hello,

Thank you for contacting.

May i know how ethernet ports you require ?

What WAN source you will be using ? Mobile ? How many sim modules you require.

What interface and protocol does PLC supports? You want to reach WEBUI of PLC remotely ?

Could be achieved by Port forwarding or through RMS.

https://teltonika-networks.com/products/iot-platforms/teltonika-remote-management/

Thanks.

Regards,

Ahmed
Best answer
by anonymous
Concerning the ethernet ports, the system has a hub (4 ports), a plc and a gateway.

Also i use an access point because i use the wireless feature to connect a wireless device. ( in case there is a TELTONIKA device with wifi, with this option i will remove the access point).

I will need only one SIM and i want access to WEBUI and TIA portal (siemens program for PLC), also to gateway using PuTTY.

The PLC is using Profinet and also open ethernet protocols.

If i can achieve an Virtual Lan connection i will not need port forwarding.

Thanks for you response.
by anonymous

Hello,

We have these models :

2 Ethernet , 1 sim module and wifi (Rut360 and Rut240)

4 Ethernet , 2 sim and wifi ( Rut950)

All above are supporting vlans also. 

Thanks