Have been trying to setup wireguard on my RUT950 for several days.
Firmware is RUT9XX_R_00.06.08.1
My VPN supplier is Integrity VPN
I have installed wireguard on the router and tried to setup the configurations. I have also searched in the examples in the wiki, but without sucess.
When i check in the CLi with the command WG SHOW i get no answer.
Below is the config file i get from my vendor
[Interface]
PrivateKey = XXXXXXXXxxxxxxxxIZVI=
Address = 10.0.181.42/24,fdab:1337:1337:181::42/64
DNS = 2001:9b1:8826::53, 2001:9b0:4:2601::53, 98.128.186.86, 155.4.89.136
[Peer]
PublicKey = YYYYYYYYyyyyyyyyJioWZZ4XIqz4PQY=
Endpoint = wireguard.5july.net:48574
AllowedIPs = 0.0.0.0/0, ::/0
This i have typed in as below.
And the peer as below
No other changes done. Before i started i was also made a factory reset as i have tried som many different things so i forget all changes.
This to ensure that no old changes affect the setup.
Thanks in advance.