Hi,
I have made progress on the router links between the sites.
At this moment, from any router I can ping all the IP addresses, I have positive feedback.
The radio relays cannot communicate with each other.
When there is a walkie-talkie communication on the master relay, the slave 1 relay (site 2) and slave 2 relay (site 3) must receive the walkie-talkie communications from the master relay (site 1).
I have to commission all the equipment for the EDF group.
I'm probably stuck on configuring firewalls in routers or site-to-site routing.
I'm sure your engineers by connecting this into the routers can explain to me where it's wrong.
Monday morning TEAMVIEWER will be activated and all the equipment will be in service.
Thanks for your help.
Below are the ping lists are ok:
(I did not touch the rules of firewalls.)
From the ROUTEUR 1 (site 1) / 40.99.8.101 / VLAN46
Forwading 50011 port to the 40.46.8.11 IP
ping to 40.99.8.101 = ok
ping to 40.46.8.101 = ok
ping to 40.46.8.11 (repeater MASTER site 1) = ok
ping to 40.99.8.102 = ok
ping to 40.47.8.102 = ok
ping to 40.47.8.11 (repeater esclave 1 site 2) = ok
ping to 40.99.8.103 = ok
ping to 40.48.8.103 = ok
ping to 40.48.8.11 (repeater esclave 2 site 2) = ok
From the ROUTEUR 2 (site 2) / 40.99.8.102 / VLAN47
ping to 40.99.8.101 = ok
ping to 40.46.8.101 = ok
ping to 40.46.8.11 (repeater MASTER site 1) = ok
ping to 40.99.8.102 = ok
ping to 40.47.8.102 = ok
ping to 40.47.8.11 (repeater esclave 1 site 2) = ok
ping to 40.99.8.103 = ok
ping to 40.48.8.103 = ok
ping to 40.48.8.11 (repeater esclave 2 site 2) = ok
From the ROUTEUR 3 (site 3) / 40.99.8.103 / VLAN48
ping to 40.99.8.101 = ok
ping to 40.46.8.101 = ok
ping to 40.46.8.11 (repeater MASTER site 1) = ok
ping to 40.99.8.102 = ok
ping to 40.47.8.102 = ok
ping to 40.47.8.11 (repeater esclave 1 site 2) = ok
ping to 40.99.8.103 = ok
ping to 40.48.8.103 = ok
ping to 40.48.8.11 (repeater esclave 2 site 2) = ok