FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
+1 vote
1,567 views 2 comments
by anonymous

Dear all,

I'm working with a RUT240, and i'm setting an IPSEC VPN with Fortigate firewall.

The tunnel works good, but only with the first remote IP address inserted.

In "ipsec status" in CLI, i see only the first tunnel opened.

Why the other 3 subnet hasn't a tunnel opened?

Thanks in advance!

by anonymous
For this case you MUST use IKEv2 IPSEC. Fortigate can work with several subnets on IKEv1, Teltonika/OpenWRT can not.
by anonymous
Hello,

Use IKEV2 and in fortinet try using address group that should solve the problem.

1 Answer

0 votes
by anonymous
Hello,

Your issue probably comes from the Fortigate at the other end it narrows the scope of allowed addresses in the SA. Check that the leftsubnet field contains all networks you want to route through the tunnel and add the missing ones.

Regards,