I have problem with ZeroTier VPN connection on RUT 955. I know similar questions have already been posted but I still have a problem. I followed all FAQ and wiki but no success.
Problem description
After I disconnect power supply ZeroTier connection almost never gets established. Connection gets established if I manually reset ZeroTier using CLI command (/etc/init.d/zerotier restart). In this case I can ping ZeroTier IP until next reboot.
On wiki I seen there is startup script which solves this issue (
https://community.teltonika-networks.com/13942/zerotier-reboot). I integrated this script with lowercase ‘w’. For IP address I used one Windows ZeroTier client which is always online and I can ping it. Also from Teltonika when ZeroTier connection warks.
After I reboot router (disconnect power supply) after few minutes I can ping router but only for approximately 1 minute. After that it can’t ping it any more.
If I use above startup script remote reboot don’t work. Even if I use lowercase ‘w’.
What I did with RUT 955:
1) Reset device to factory defaults
2) Load newest FW
FW = RUT9XX_R00.06.08.2
Kernel = 3.18.44
Bootloader = 3.0.1
3) Load zerotier package
1.1.17
4) Set ZeroTier VPN settings
General = Enable + Network
VPN = Enable + Client + Network
5) Activate startup script
I use ZeroTier also with one older version of RUT 955 router where I don’t experience such problems. I use same FW and ZeroTier settings
FW = RUT9XX_R00.06.08.2
Kernel = 3.18.44
Bootloader = 2.0.0
Where could be the problem?