Hello,
my issue is following: on LAN I have several devices with static IPs in subnet 192.168.1.0/24 (DHCP server is enabled though is doesn't assign addresses). I need to connect WAN to other network with DHCP server in subnet 192.168.13.0/24.
However on the LAN there is also device with IP address 192.168.13.124, that I cannot connect directly to the same network as WAN (I need to use PoE switch that is on LAN). Is it possible to configure RUT955 in that way that IP address 192.168.13.124 would be visible from WAN?
Thank you in advance.
Regards
Anton