FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
310 views 0 comments
by anonymous
I have a RUT955 connected to an L2TP server running on a Mikrotik router. The connection works, the RUT gets assigned a virtual IP (172.16.8.87 in this case) and it can access my HQ router/L2TP server (10.188.0.1), but for some reason it can't access the rest of the HQ network (10.188.0.0/24). From the HQ network, I can't access anything on the remote side – I can't get to the router neither by its LAN IP (10.188.2.1) or by its virtual IP. I have added firewall zone rules to allow traffic between the L2TP IF an LAN/WAN. I tried turning off the firewall completely, which made no difference.

I can ping the RUT from the Mikrotik, but I can not ping the RUT from a computer in the HQ network.

Any clues?

1 Answer

0 votes
by anonymous

Hello,

Could you try to add a static route rule in your RUT955 configuration? More about static rules can be found right here: https://wiki.teltonika-networks.com/view/RUT955_Routing_(legacy_WebUI)#Static_Routes

Static route should look similar to this:

Destination address: 10.188.0.0

Netmask: 255.255.255.0

Gateway: L2TP server IP.

Regards.