WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

After Firmwareupdate RUTX11 to newest release "blank web side" after WebGUI login

0 votes
204 views 1 comments
by anonymous
After updating the "RUTX11" LTE Modem to the newest Firmware "RUTX_R_00.07.00"
and resetting the system to the default values I get now a "blank web side" after successfully WebGui login.

CLI access is possible to the RUTX11 after root@192.168.1.1 SSH login.

The WAN port is connected to the internal Network using DHCP, DNS name resolution and
internet access is possible for the to one of the LAN ports connected PC.

Did there went something wrong during the Firmware update and how do I get working the Web GUI again?
by anonymous
I had this problem on multiple RUTX10's. I fixed it by holding reset button to perform a factory reset.

1 Answer

0 votes
by anonymous

Hello,

Could you try to re-install firmware via the bootloader menu? Instructions can be found right here: https://wiki.teltonika-networks.com/view/RUTXxx_Firmware_via_The_Bootloader_Menu

Regards.