Hi
I see there are several posts relating to problems in setting the WWAN channel as the primary WAN and the LTE as the failover.
These are my settings in my RUT950 (vs RUT9_R_00.07.007 firmware) which indicates the RUT950 is set up correctly to have the WWAN as the primary WAN. However, traffic monitoring shows traffic is going through LTE.
When I turn LTE off, there is no internet and the device drops off. So WWAN is not being set as primary WAN. Why?
Something is wrong in that WWAN seems unable to be the primary WAN.
Can this be checked/investigated?
-------------------------------------------