WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

RUT950 WWAN does not work as primary WAN

0 votes
185 views 0 comments
by anonymous

Hi

I see there are several posts relating to problems in setting the WWAN channel as the primary WAN and the LTE as the failover.

These are my settings in  my RUT950 (vs RUT9_R_00.07.007 firmware) which indicates the RUT950 is set up correctly to have the WWAN as the primary WAN. However, traffic monitoring shows traffic is going through LTE.

When I turn LTE off, there is no internet and the device drops off. So WWAN is not being set as primary WAN. Why?

Something is wrong in that WWAN seems unable to be the primary WAN.

Can this be checked/investigated?

-------------------------------------------

1 Answer

0 votes
by anonymous
Hello,

Thank you for contacting.

It is recommended to downgrade to 6.08.3 . As there are some major updates needed for this one.

Thanks

Regards,

Ahmed