FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
218 views 0 comments
by anonymous
Hello

What is the resolution of the ADC and the global accuracy

Is the accuracy dependent on the supply voltage ?

If the resolution is 12 bit the interval under 12 V should be

Q = Vcc/2^12 = 2.9mV

But during my tests variation of 10 mV at the pin 3 ( Ain2) do not change the value received on the data.element [6]

The initial value is close to the mesured value on the pin : 2946 mV for 2920 mV applied. But when the signal decreases slowly the value does not change

Thank you

1 Answer

0 votes
by anonymous

Hi,

It seems that you're in the wrong forum. Everything related about your device will be answered here: https://community.teltonika-gps.com/

Thank you.

Regards.