8401 questions

9888 answers

15684 comments

14167 members

+1 vote
69 views 1 comments
by
Hi,

I am using a RUT240 setup with a custom APN cellular network on an IPWAN, with lets say IP address of 192.168.8.8, and no internet access (so no RMS). I can access the WebUI using an ethernet cable to the LAN port. With the LAN port connected, I can even access the WebUI on the IPWAN address (192.168.8.8). However, once I remove the ethernet connection, the WebUI no longer works. I can still ping the 192.168.8.8 in this state. I have "enable remote HTTP access" on. I'm stuck! I would be very grateful for any suggestions on how to resolve this. Thanks! Luke
by

I am also facing same issue, If you found any helpful guide please let me know. Thanks

1 Answer

0 votes
by

Hi,

If you set your device by adding static lease{ Network> LAN > Static lease), You can see the option on Status>Network>DHCP leases, where you can easily find your settings.