WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

RUT240 cellular webui access issue

+1 vote
192 views 0 comments
by anonymous
Hi,

I am using a RUT240 setup with a custom APN cellular network on an IPWAN, with lets say IP address of 192.168.8.8, and no internet access (so no RMS). I can access the WebUI using an ethernet cable to the LAN port. With the LAN port connected, I can even access the WebUI on the IPWAN address (192.168.8.8). However, once I remove the ethernet connection, the WebUI no longer works. I can still ping the 192.168.8.8 in this state. I have "enable remote HTTP access" on. I'm stuck! I would be very grateful for any suggestions on how to resolve this. Thanks! Luke

1 Answer

0 votes
by anonymous

Hi,

If you set your device by adding static lease{ Network> LAN > Static lease), You can see the option on Status>Network>DHCP leases, where you can easily find your settings.