Question

Hi. I have site where i need remote access to devices. Site have routers that i don't have possible to configure(RouterX). I can reach devices DeviceY1 and DeviceY2 from PC2. What i need to do is get access to DeviceY1 and DeviceY2 from PC1. Now i'm able to reach PC2 from PC1 so i have remote access to Router1 LAN, but what i think, i need route from PC1 to WAN interface of Router1, but i haven't found a proper configuration. 

Answer 1

Hello,

In your case, I would recommend setting a static route in your VPN server router: https://wiki.teltonika-networks.com/view/RUT240_Routing#Static_Routes

As you have mentioned that you can access Router1 LAN IP:

Destination address - Router X LAN

Netmask - 255.255.255.0

Gateway - Router 1 LAN IP

Regards.

Comments

Thank you for answer, that was what i thought too, but for some reason it doesn't work. On server side i have edgerouter configured as told. But still cant ping Devices Y2,Y1, and traceroute doesn't use the static route i have configured? What did i miss.