subscribe to our Youtube


14455 questions

17168 answers


0 members

We are migrating to our new platform at Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
332 views 3 comments
by anonymous
Hi every one.

I need to know how to do data transmission and monitoring from the device connected to TRB145 via RS485 to IOT platform using MQTT

Is there any documents shows me how to do that step by step ?

more over can any one tell me where and how the configurations (for MQTT) are set please.

and thank you

1 Answer

0 votes
by anonymous


Thank you for contacting us.
I would like to ask, if you monitoring and transmit Modbus data?
If so, please follow these steps:
1. Connect to a TRB145, navigate to Services - Package manager and install Modbus Serial Master.
2. Configure Modbus serial master (add slave devices and request information).
3. Once, this done navigate Services - Data to server.
4. Add new data sender and as protocol MQTT, fill rest required information and save and apply configuration.
If everything is done correctly, MQTT data should be transmitting to the given server.
Please inform if that helps.

Best regards,


by anonymous

Hi Sigitas

thank you very much for answering my question 

I will try the steps you indicate and if it works I will let you know 

again thanks.

by anonymous
another question:

are the same steps above can be applied for other gateways and routers from Teltonika such as TRB255 TRB245 RUT955 ?

by anonymous

Yes, you could apply these steps to all our devices, which are using RutOS 7.

Best regards,