FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
167 views 2 comments
by anonymous

Hello,

I´ve setup RUT240 as master. PLC Omron NX102 as slave. I´ve setup alarm SMS when value of some register is same as condition. It is working fine, when I use only one alarm sms. When I set up another one alarm for example to next one register it is not sending sms. It only sends sms for firs row of alarm.

I´ve tried several FW´s (RUT2XX_R_00.01.14.3, RUT2XX_R_00.01.14.4, RUT2XX_R_00.01.14), now I´m usig RUT2XX_R_00.01.14.3.

Uphere is situation. When value on register 2 is equal to 1 sms is send. When value on register 3 is equal to 1 sms with this alarm is not send. When I delete first row there is only row with register 3 and value on register 3 is equal to 1 --> sms is send. 

 
Hope you can understand me:)

Do you have some solution?

Thank you

1 Answer

0 votes
by anonymous
Hello,

Thank you for the elaborate description. Please attach a troubleshoot file to your original question by editing it for us to analyze.

Regards.
by anonymous
Hello, I´ve just updated post with attaching troubleshooting file
by anonymous
Thank you. I have noticed this issue earlier and reported it to the RnD department. I will let you know once I get any useful information.